Content starts here
The antenna design of NFC is supported by this web site
- Before using this web site, Confirmed "Before using our products"
- Using this web site, read "Tutorial" and "Design guide"
- Not corresponded Internet Explorer 8 or less
- A recommended browser: Chrome





since 2012
Ver. 3.6
: | mm |
: | mm |
: | mm |
: | mm |
: | µm |
: | turn |
Cr (Resonance capacity) |
Auto Set | : | pF |
Specified max. antenna size
(more than 8mm)
No
Yes
Lx(Length X) | : | mm | ||
Ly(Length Y) | : | mm |
The value should be integer, 8 to 100
The aspect ratio should be less than 8
"Custom" is selected, calculation is cancelled
Setting is invalid on Save/Load
Original R/W
Nexus S
(Nexus is registered trademark of Google Inc.)
mm mm mm mm µm turn Vrms Ω
L[µH] | C1[pF] | C2[pF] | r1[Ω] |
---|---|---|---|
Resonance capacity* | input capacity(**) | Tag antenna design parameter | ||||||
---|---|---|---|---|---|---|---|---|
Cr | Ci | L | Lx | Ly | w | g | t | N |
pF | pF | µH | mm | µm | turn | |||
*An external resonance capacity may subtract the input capacity(**) of the LSI from the displayed Cr.
[RF Spec.]:
ISO/IEC14443 Type B
JIS X 6319-4 FeliCaNote2:
[ ! ] The aspect ratio should be less than 8 ( Adjusted to less than 8 )
[!] The patterns are adjusted without overlap
[ ! ] Resonance capacitor should be inputted to first decimal place
Not corresponded Internet Explorer 8 or less (Use other browsers)
Selection of LSI
Communication distance and Magnetic field for selected device are supportedModel Number | NFC spec. | Host IF | IF voltage |
Onboard FeRAM |
Encrypted communication |
---|---|---|---|---|---|
MN63Y1213 | TYpeB FeliCa (Note) |
I2C (100Kbps) |
3V system | 432Byte | AES128 |
MN63Y1210A | TYpeB FeliCa |
I2C (100Kbps) |
3V/5V system | 432Byte | - |
MN63Y1214
MN63Y1221 |
TYpeA TYpeB FeliCa |
I2C (400Kbps) |
3V system | 960Byte | - (Password) |
Note: "FeliCa" is registered trademark of Sony Corporation.
For first visited user
After confirmed device, select function on tab, If "Mag. Field" is selected
The communication distance and magnetic field strength of the antenna
is displayed
Video of operation for NFC Design Navigator
Clicking opens new window for viewing video.
Magnetic field strength and communication distance*
About Comparison with the measured values Here
The position of Tag antenna | Communication distance (Height of antenna) | |||||||
---|---|---|---|---|---|---|---|---|
Offset | Tilt | Type A | Type B | FeliCa (Note) | ||||
X | Y | α | β | γ | PBF | PBF | PBF | |
mm | ° | mm | mm | mm | ||||
Adjusting position of Tag antenna
Rotation of α·β·γ:
: | mm |
: | mm |
: | mm |
: | ° |
: | ° |
: | ° |
W. S.
It takes time for display. if necessary, please select "Yes"
Parameter dependence
Adjusting the parameters with dependence of the communication distance.
Adjusting result of the parameters are displayed in the graph
* Note: The graph is not updated, until the button is clicked.
( : Setting before the update,
: Range can not be set )
Communication demo
The relative position of Tag antenna | |||||
---|---|---|---|---|---|
Offset | Tilt sensor sync | ||||
x | y | z | α(z) | β(y) | γ(x) |
mm | ° | ||||
0 | 0 | ↑ 1 | 0 | 0 | 0 |
W. S.
Suitable antenna design
The best antenna for R/W is calculated. [The max. distance for FeliCa]
2) Clicking "Accept" shows result,Adjustment is possible
one of antennaea is shown.
Calc. result |
Parameters of Tag antenna | Communication distance (Height of antenna) |
||||||||
---|---|---|---|---|---|---|---|---|---|---|
Lx |
Ly |
w <=3.0 |
g Fixed |
t Fixed |
N |
Type A | Type B | FeliCa (Note) | ||
PBF | PBF | PBF | ||||||||
mm | µm | turn | mm | |||||||
Creating PCB design data
PCB design data :
Antenna | Antenna+LSI peripheral (without connector) |
Antenna+LSI peripheral | Antenna+LSI peripheral (with connector) |