Text begins from here.
Comparison with EX ,SP
Comparison with Nu-EX ,Nu-SP
| Nu-EX1 | Nu-EX2 | Nu-SP | |||||
|---|---|---|---|---|---|---|---|
| Standard | Isolated | Standard | Isolated | ||||
| Supported products (Debug IF) |
101C/E/L, 103L/S/H (DWire8/ DWire13L/ DWire32L/ DWire32A) (*1) |
||||||
| Device display | LED - 2 | LCD (2 rows x 16 characters each)、LED - 2 | LED - 3 | ||||
| Isolation from target | - | Support | - | Support | - | ||
| Operating switches | None | Puch switch - 2 | Puch switch / Slide switch |
||||
| Target I/O voltage | 1.65 to 5.5V (*2) |
2.7 to 5.5V (*2) |
1.65 to 5.5V (*2) |
2.7 to 5.5V (*2) |
1.65 to 5.5V (*3) |
||
| Target power supply current consumption (Max) | 5.0V | 15mA(*4) | 30mA(*4) | 15mA(*4) /110mA(*5) /130mA(*6) |
30mA(*4) | 5mA(*4) /30mA(*5) |
|
| 3.3V | 10mA(*4) | 25mA(*4) | 10mA(*4) /160mA(*5) /200mA(*6) |
25mA(*4) | |||
| Target voltage error detection | Support | - | |||||
| Target power supply | 3.3V/5V Max 200mA |
- | 3.3V/5V Max 200mA |
- | 5V Max 200mA |
||
| Debugger | DebugFactory Builder | Unsupported | |||||
| Programmer | EX Commander | ||||||
| Device power supply | USB bus power | USB bus power、 Target power |
USB bus power |
USB bus power、 Target power |
|||
| Programming | Support for mass-production writing | Support(a writing on production line is supported for built-in non-volatile memory of AM microcomputers) | |||||
| Stand-alone writing | - | Support | |||||
| Number of registered data types / Maximum size |
- | 16/1GB | 1/1MB | ||||
| Debug | Debug function | Incorporated in the device depends on the debugging | - | ||||
| Trace | - | ||||||
| Multi core | Target one core can only debug. | - | |||||
| Others limit | Products of 103S/H, when the external reset is on, it does not allow you to continue debugging. |
- | |||||
| Host OS |
Windows 8 (32bit/64bit OS) Windows 10 (32bit/64bit OS) |
||||||
| Host interface | USB1.1 Full Speed / USB2.0 High Speed | USB1.1/2.0 Full Speed | |||||
*1:There are the microcomputers that are not supported in Nu-SP.
For more details, please contact the semiconductor support system on our website.
*2:When the power supply from the target board is less than +3.0 V, the power supply from the USB connector of Nu-SP is required.
*3:When the power supply from the target board is less than +2.8 V, the power supply from the USB connector of Nu-SP is required.
*4:Uses USB bus power / AC adapter. *5:With target power supply operating (EX2 LCD off).
*6:With target power supply operating (EX2 LCD on).
For more details, please contact the semiconductor support system on our website.
*2:When the power supply from the target board is less than +3.0 V, the power supply from the USB connector of Nu-SP is required.
*3:When the power supply from the target board is less than +2.8 V, the power supply from the USB connector of Nu-SP is required.
*4:Uses USB bus power / AC adapter. *5:With target power supply operating (EX2 LCD off).
*6:With target power supply operating (EX2 LCD on).
Sub Menu begins from here.